All posts by Manoj R. Thakur

About Manoj R. Thakur

In 2014 I started contributing to Open Source electronics, and life has just gotten better from there. Founder of Maven Technologies.

Moving message display using arduino

Matrix Display Interface with MAX7219

The MAX7219 LED driver saves microcontroller pins and processing time. It uses only three IO pins of an Arduino.  It is easy to connect multiple displays by connecting DIN and DOUT pins.

Using a single MAX7219 you can drive 64 LEDs while you only need 4 wires to interface it to a microcontroller. In addition you can daisy chain multiple MAX7219 chips for bigger displays. Continue reading Moving message display using arduino

LCD interface using I2C Module with Arduino

I2C module with LCD display using Arduino

 How to interface PCF85574 module with arduino?
To connect LCD display 16×2 or 20×4 to Arduino you know you’ll need at least 6 wires to connect, it means sacrificing some IO’s that could be used for connecting other components such as sensors or motors. another way is to use 74HC595 Shift register for interfacing. In this tutorial we will discuss on PCF8574 I2C LCD Display Interface.
A module that can be used to circumvent this problem is the I2C Module for LCD Display with PCF8574 (datasheet ):

Continue reading LCD interface using I2C Module with Arduino

Text to Speech on arduino

Give your project a voice! Without Text-to-Speech Module, Arduino TTS library makes it possible, voice synthesizer that converts a stream of digital text into retro (robot) speech. Its simple needs only external LM385 amplifier with arduino Uno, No special components or shields required. Thanks to Gabriel Petrut and Clive Webster for making this thing.
Application Ideas:
  • Reading Internet-based data streams (such as e-mails or Twitter feeds)
  • Conveying status or sensor results from robots, scientific equipment, or industrial machinery
  • Language learning or speech aids for educational environments

Continue reading Text to Speech on arduino

ICL7107 Digital Voltmeter

The circuit given here is of digital voltmeter with LED 7-segment display using the ICL7107. It measures voltage from 0.00V to 99.9V. ICL7107 is a 3 1/2 digit A/D converters with LED 7-Segment Driver.

The Intersil ICL7106 and ICL7107 are high performance, low power, 31/2 digit A/D converters. Included are seven segment decoders, display drivers, a reference, and a clock. The ICL7106 is designed to interface with a liquid crystal display (LCD) and includes a multiplexed backplane drive; the ICL7107 will directly drive an instrument size light emitting diode (LED) display. Continue reading ICL7107 Digital Voltmeter

Getting Started with Proteus

In this tutorial we are discussing on how to use arduino with Proteus simulation software. We assume that you have installed Arduino Library in your Proteus software. for installing arduino library in Proteus visit “How to add library in Proteus?” We will learn it by taking led blink example. Continue reading Getting Started with Proteus